Explore our precision-engineered, high-reliability power supply modules purpose-built for 5G communication base station environments β featuring double insulation, superior EMC performance, and wide-range input compatibility.




A Class II power supply β defined under IEC 61140 and recognized by global safety standards β relies entirely on double or reinforced insulation rather than a protective earth connection for user safety. This fundamental design principle eliminates the need for a grounding conductor, making Class II supplies uniquely suited for environments where earthing is impractical, unreliable, or undesirable.
In the context of 5G communication base stations, this matters enormously. Macro cells, small cells, and distributed antenna systems (DAS) are increasingly deployed in rooftop installations, street-level cabinets, indoor DAS nodes, and remote rural towers β locations where a robust protective earth cannot always be guaranteed. Class II power supplies remove this dependency entirely, dramatically simplifying installation logistics and reducing the risk of ground-loop interference that can degrade RF signal quality.
Beyond safety architecture, Class II designs typically achieve superior electromagnetic compatibility (EMC) performance. Without a ground reference for high-frequency noise to discharge through, engineers must implement more rigorous internal filtering β a challenge that, when solved well, results in exceptionally clean output power that protects sensitive 5G baseband and RF electronics from conducted interference.
The global rollout of 5G networks is one of the most capital-intensive infrastructure programs in telecommunications history β and power supply quality is at its heart.
Global 5G base station deployments surpassed 3.5 million units by end of 2024, with projections exceeding 7 million by 2027. Each macro base station requires 3β6 kW of reliable DC power, while small cells demand 100β400W per node β creating massive demand for Class II power modules.
5G's millimeter-wave (mmWave) frequencies require dense small cell networks β one cell per 100β250 meters in urban cores. These street-level deployments on lamp posts, building facades, and transit infrastructure make earthing-free Class II supplies the only practical choice for power engineers.
5G base stations consume up to 3Γ more power than their 4G predecessors. With electricity costs representing 20β30% of network OPEX, operators demand power supplies with efficiency ratings above 92% β a benchmark that modern Class II designs consistently achieve through advanced GaN and SiC switching topologies.
The shift to Open RAN disaggregates hardware procurement, creating opportunities for specialized power supply manufacturers to supply RU (Radio Unit), DU (Distributed Unit), and CU (Central Unit) equipment independently. This trend directly benefits Class II power supply specialists with deep application knowledge.
Manufacturing plants, logistics hubs, ports, and mining operations are deploying private 5G networks at scale. These industrial environments demand ruggedized Class II power supplies rated for wide temperature ranges (-40Β°C to +70Β°C) and high vibration/shock resistance β a growing segment for premium power manufacturers.
Modern 5G base station power systems increasingly integrate Class II AC/DC conversion with lithium battery backup and solar/wind hybrid inputs. Power supplies must support seamless transition between grid, battery, and renewable sources while maintaining output stability within Β±1% β a demanding specification driving premium product development.
As 5G matures and 5G-Advanced (5G-A) and early 6G research accelerate, the demands placed on Class II power supply technology are evolving rapidly across multiple dimensions.
Gallium Nitride (GaN) and Silicon Carbide (SiC) power devices are replacing conventional silicon MOSFETs in Class II designs, enabling switching frequencies above 1 MHz. This dramatically reduces passive component size, increases power density to over 50W/inΒ³, and pushes efficiency beyond 95% β critical for thermally constrained base station enclosures.
Next-generation Class II supplies integrate digital controllers with PMBus/IΒ²C communication interfaces, enabling real-time telemetry of output voltage, current, temperature, and efficiency. Base station management systems can dynamically adjust power delivery based on traffic load β reducing idle power consumption by up to 40%.
As 5G small cells proliferate in extreme climates β from Middle Eastern deserts to Arctic deployments β Class II power supplies must operate reliably across -40Β°C to +85Β°C ambient ranges with zero active cooling. Advanced thermal interface materials and topology optimization are enabling this without efficiency penalties.
The industry is transitioning from traditional 48V DC bus architectures to 380V HVDC distribution in large base station facilities, reducing distribution losses by up to 30%. Class II power supplies are evolving to support both output standards, with universal architectures that can be configured for either voltage level during manufacturing.
Telecom operators increasingly require 10β15 year product lifecycle guarantees and RoHS/REACH compliance as part of sustainability commitments. Leading Class II power supply manufacturers are responding with modular, field-repairable designs and comprehensive spare parts programs that reduce electronic waste.
As power supplies gain network connectivity for remote monitoring, cybersecurity becomes critical. Emerging Class II designs incorporate hardware security modules (HSM) and encrypted firmware update mechanisms to prevent tampering with power delivery to critical 5G infrastructure β a requirement increasingly mandated by national telecom regulators.
Class II power supplies serve as the invisible backbone across every layer of the 5G network architecture β from the core to the edge, from urban centers to remote industrial sites.
Traditional tower-mounted macro cells require 3β6 kW of AC/DC conversion with N+1 redundancy. Class II supplies provide the double-insulation safety margin required for elevated installations where maintenance access is infrequent and earthing infrastructure may be compromised by corrosion over time.
Street-level 5G small cells on lamp posts, traffic signals, and building facades operate in environments where protective earthing is architecturally impossible. Class II power supplies (typically 100β400W) with IP65 ratings and -40Β°C cold-start capability are the standard solution for these high-density urban networks.
Distributed Antenna Systems in airports, stadiums, hospitals, and office buildings use Class II power supplies to feed remote radio heads and antenna nodes throughout the structure. The absence of grounding requirements simplifies cable routing through finished interior spaces significantly.
Smart factories deploying private 5G for AGV control, robotic welding, and real-time quality inspection require power supplies that survive EMI-rich industrial environments. Class II designs with reinforced insulation provide superior noise immunity compared to earthed alternatives in high-EMI production floors.
High-speed rail trackside 5G base stations and onboard train communication systems require Class II power supplies rated for shock, vibration, and wide temperature swings. These applications demand MIL-STD-810 or EN 50155 compliance alongside the standard Class II safety architecture.
Port automation and offshore platform 5G networks operate in salt-spray environments where corrosion rapidly degrades earthing connections. Class II power supplies with conformal coating, marine-grade connectors, and IEC 60945 maritime certification provide the only viable long-term safety solution in these conditions.
Founded in 1999, Zhuhai Xinhe Electronic Co., Ltd. is a National High-Tech Enterprise with nearly 30 years of experience in adapters and high-reliability power solutions. We integrate R&D, manufacturing, sales and technical support, focusing on OEM / ODM customization of high-power power modules, power adapters and precision electronic assemblies, with more than 260 self-developed products.
Xinhe power solutions are widely applied across medical devices, industrial equipment, test and measurement instruments, automation systems, communication equipment and high-end electronic applications, where high efficiency, operational stability and long-term reliability are critical. With proven expertise in high-power designs from 300W to 3000W and above, we provide one-stop support covering concept design, prototyping, safety and EMC compliance, and mass production delivery, tailored to specific application requirements.
Driven by customer requirements, Xinhe leverages a flexible and efficient OEM / ODM model to help global partners achieve product differentiation, faster time-to-market and stable long-term supply.
Advanced equipment controls every step from raw materials to finished products, ensuring top-notch reliability.
Automated production lines with SMT technology boost production efficiency and product quality continuously.
Professional team with large R&D investment follows cutting-edge tech via industry-academia-research cooperation.
Customized solutions quickly provided based on customers' electrical performance, size, and function requirements.
500+ product models covering wide power ranges, optimized for diverse industrial and communication applications.
MES and ERP systems enable intelligent production management and informatized operations for global delivery.
Every Class II power supply undergoes comprehensive electrical safety, EMC, thermal, and reliability testing before leaving our facility β ensuring your 5G base station deployments receive only verified, field-ready power solutions.




A comprehensive quality management system is established. Advanced equipment helps control every step from raw materials to finished products, ensuring top-notch and reliable products for demanding 5G deployments.
Automated production lines are equipped with SMT and other advanced technologies, continuously updated to boost production efficiency and product quality for high-volume 5G infrastructure programs.
Our professional engineering team maintains large R&D investment, follows cutting-edge power technology closely, and creates innovative Class II power solutions through industry-academia-research cooperation.
Based on customers' specific needs in electrical performance, mechanical size, and function, customized Class II power solutions are quickly developed to ensure product quality and application effectiveness.
500+ product models spanning 100W to 3000W+ covering every layer of 5G network architecture β from small cell nodes to macro base station rectifiers β all available for OEM/ODM customization.
MES and ERP intelligent management systems optimize procurement, inventory, and production scheduling, enabling reliable large-volume delivery for global 5G rollout programs on tight timelines.
We have integrated Research and Development, Manufacturing and Sales together β backed by comprehensive international safety and quality certifications for global 5G market access.









Xinhe Class II power solutions are trusted by leading telecom equipment manufacturers, system integrators, and 5G network operators across the globe.










From compact open-frame modules to high-power enclosed units β our full product range covers every power requirement across the 5G network ecosystem, all available for OEM/ODM customization.







